Lesbare Urls Problem
Eingetragen von Shankx91 (8)am 07.04.2009 - 13:52 Uhr in
Hallo,
habe ein Problem und zwar will ich bei Drupal Lesbare Urls einschalten, jedoch bekomme ich die Fehlermeldung Your system configuration does not currently support this feature. The handbook page on Clean URLs has additional troubleshooting information. Bei meinem Host Alfahosting liegt es nicht, da mod_rewrite eingeschaltet ist, was sie mir bestätigt haben.
Woran könnte es noch liegen ? Ich scheibe euch mal noch den Inhalt meine .htaccess Datei und meiner settings.php Datei
.htaccess
<?php
ddHandler x-httpd-php5 .php .phtml
AddDefaultCharset none
<FilesMatch "\.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$">
Order allow,deny
</FilesMatch>
ErrorDocument 404 /index.php
DirectoryIndex index.php
<IfModule mod_expires.c>
ExpiresActive On
ExpiresDefault A1209600
ExpiresByType text/html A1
</IfModule>
?>settings.php
<?php
// $Id: default.settings.php,v 1.8.2.1 2008/08/13 06:52:36 dries Exp $
/**
* @file
* Drupal site-specific configuration file.
*
* IMPORTANT NOTE:
* This file may have been set to read-only by the Drupal installation
* program. If you make changes to this file, be sure to protect it again
* after making your modifications. Failure to remove write permissions
* to this file is a security risk.
*
* The configuration file to be loaded is based upon the rules below.
*
* The configuration directory will be discovered by stripping the
* website's hostname from left to right and pathname from right to
* left. The first configuration file found will be used and any
* others will be ignored. If no other configuration file is found
* then the default configuration file at 'sites/default' will be used.
*
* For example, for a fictitious site installed at
* http://www.drupal.org/mysite/test/, the 'settings.php'
* is searched in the following directories:
*
* 1. sites/www.drupal.org.mysite.test
* 2. sites/drupal.org.mysite.test
* 3. sites/org.mysite.test
*
* 4. sites/www.drupal.org.mysite
* 5. sites/drupal.org.mysite
* 6. sites/org.mysite
*
* 7. sites/www.drupal.org
* 8. sites/drupal.org
* 9. sites/org
*
* 10. sites/default
*
* If you are installing on a non-standard port number, prefix the
* hostname with that number. For example,
* http://www.drupal.org:8080/mysite/test/ could be loaded from
* sites/8080.www.drupal.org.mysite.test/.
*/
/**
* Database settings:
*
* Note that the $db_url variable gets parsed using PHP's built-in
* URL parser (i.e. using the "parse_url()" function) so make sure
* not to confuse the parser. If your username, password
* or database name contain characters used to delineate
* $db_url parts, you can escape them via URI hex encodings:
*
* : = %3a / = %2f @ = %40
* + = %2b ( = %28 ) = %29
* ? = %3f = = %3d & = %26
*
* To specify multiple connections to be used in your site (i.e. for
* complex custom modules) you can also specify an associative array
* of $db_url variables with the 'default' element used until otherwise
* requested.
*
* You can optionally set prefixes for some or all database table names
* by using the $db_prefix setting. If a prefix is specified, the table
* name will be prepended with its value. Be sure to use valid database
* characters only, usually alphanumeric and underscore. If no prefixes
* are desired, leave it as an empty string ''.
*
* To have all database names prefixed, set $db_prefix as a string:
*
* $db_prefix = 'main_';
*
* To provide prefixes for specific tables, set $db_prefix as an array.
* The array's keys are the table names and the values are the prefixes.
* The 'default' element holds the prefix for any tables not specified
* elsewhere in the array. Example:
*
* $db_prefix = array(
* 'default' => 'main_',
* 'users' => 'shared_',
* 'sessions' => 'shared_',
* 'role' => 'shared_',
* 'authmap' => 'shared_',
* );
*
* Database URL format:
* $db_url = 'mysql://username:password@localhost/databasename';
* $db_url = 'mysqli://username:password@localhost/databasename';
* $db_url = 'pgsql://username:password@localhost/databasename';
*/
$db_url = 'mysqli://web203:7cFZ67WN@localhost/usr_web203_1';
$db_prefix = 'dp68_';
/**
* Access control for update.php script
*
* If you are updating your Drupal installation using the update.php script
* being not logged in as administrator, you will need to modify the access
* check statement below. Change the FALSE to a TRUE to disable the access
* check. After finishing the upgrade, be sure to open this file again
* and change the TRUE back to a FALSE!
*/
$update_free_access = FALSE;
/**
* Base URL (optional).
*
* If you are experiencing issues with different site domains,
* uncomment the Base URL statement below (remove the leading hash sign)
* and fill in the URL to your Drupal installation.
*
* You might also want to force users to use a given domain.
* See the .htaccess file for more information.
*
* Examples:
* $base_url = 'http://www.example.com';
* $base_url = 'http://www.example.com:8888';
* $base_url = 'http://www.example.com/drupal';
* $base_url = 'https://www.example.com:8888/drupal';
*
* It is not allowed to have a trailing slash; Drupal will add it
* for you.
*/
# $base_url = 'http://www.example.com'; // NO trailing slash!
/**
* PHP settings:
*
* To see what PHP settings are possible, including whether they can
* be set at runtime (ie., when ini_set() occurs), read the PHP
* documentation at http://www.php.net/manual/en/ini.php#ini.list
* and take a look at the .htaccess file to see which non-runtime
* settings are used there. Settings defined here should not be
* duplicated there so as to avoid conflict issues.
*/
ini_set('arg_separator.output', '&');
ini_set('magic_quotes_runtime', 0);
ini_set('magic_quotes_sybase', 0);
ini_set('session.cache_expire', 200000);
ini_set('session.cache_limiter', 'none');
ini_set('session.cookie_lifetime', 2000000);
ini_set('session.gc_maxlifetime', 200000);
ini_set('session.save_handler', 'user');
ini_set('session.use_only_cookies', 1);
ini_set('session.use_trans_sid', 0);
ini_set('url_rewriter.tags', '');
/**
* Drupal automatically generates a unique session cookie name for each site
* based on on its full domain name. If you have multiple domains pointing at
* the same Drupal site, you can either redirect them all to a single domain
* (see comment in .htaccess), or uncomment the line below and specify their
* shared base domain. Doing so assures that users remain logged in as they
* cross between your various domains.
*/
# $cookie_domain = 'example.com';
/**
* Variable overrides:
*
* To override specific entries in the 'variable' table for this site,
* set them here. You usually don't need to use this feature. This is
* useful in a configuration file for a vhost or directory, rather than
* the default settings.php. Any configuration setting from the 'variable'
* table can be given a new value. Note that any values you provide in
* these variable overrides will not be modifiable from the Drupal
* administration interface.
*
* Remove the leading hash signs to enable.
*/
# $conf = array(
# 'site_name' => 'My Drupal site',
# 'theme_default' => 'minnelli',
# 'anonymous' => 'Visitor',
/**
* A custom theme can be set for the off-line page. This applies when the site
* is explicitly set to off-line mode through the administration page or when
* the database is inactive due to an error. It can be set through the
* 'maintenance_theme' key. The template file should also be copied into the
* theme. It is located inside 'modules/system/maintenance-page.tpl.php'.
* Note: This setting does not apply to installation and update pages.
*/
# 'maintenance_theme' => 'minnelli',
/**
* reverse_proxy accepts a boolean value.
*
* Enable this setting to determine the correct IP address of the remote
* client by examining information stored in the X-Forwarded-For headers.
* X-Forwarded-For headers are a standard mechanism for identifying client
* systems connecting through a reverse proxy server, such as Squid or
* Pound. Reverse proxy servers are often used to enhance the performance
* of heavily visited sites and may also provide other site caching,
* security or encryption benefits. If this Drupal installation operates
* behind a reverse proxy, this setting should be enabled so that correct
* IP address information is captured in Drupal's session management,
* logging, statistics and access management systems; if you are unsure
* about this setting, do not have a reverse proxy, or Drupal operates in
* a shared hosting environment, this setting should be set to disabled.
*/
# 'reverse_proxy' => TRUE,
/**
* reverse_proxy accepts an array of IP addresses.
*
* Each element of this array is the IP address of any of your reverse
* proxies. Filling this array Drupal will trust the information stored
* in the X-Forwarded-For headers only if Remote IP address is one of
* these, that is the request reaches the web server from one of your
* reverse proxies. Otherwise, the client could directly connect to
* your web server spoofing the X-Forwarded-For headers.
*/
# 'reverse_proxy_addresses' => array('a.b.c.d', ...),
# );
/**
* String overrides:
*
* To override specific strings on your site with or without enabling locale
* module, add an entry to this list. This functionality allows you to change
* a small number of your site's default English language interface strings.
*
* Remove the leading hash signs to enable.
*/
# $conf['locale_custom_strings_en'] = array(
# 'forum' => 'Discussion board',
# '@count min' => '@count minutes',
# );
?>Danke schonmal im vorraus
Gruß Toby
- Anmelden oder Registrieren um Kommentare zu schreiben
$base_url + RewriteBase
am 07.04.2009 - 18:17 Uhr
1.
$base_url in der Datei "settings.php"definieren.
2.
Der gepostetet Code der .htaccess zeigt nicht Drupals vollstaendige .htaccess.
In dieser Datei sollte die RewriteBase definiert sein.
Hier eine vollstaendige .htaccess von Dupal:
#
# Apache/PHP/Drupal settings:
#
# Protect files and directories from prying eyes.
<FilesMatch "\.(engine|inc|info|install|module|profile|test|po|sh|.*sql|theme|tpl(\.php)?|xtmpl|svn-base)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template|all-wcprops|entries|format)$">
Order allow,deny
</FilesMatch>
# Don't show directory listings for URLs which map to a directory.
Options -Indexes
# Follow symbolic links in this directory.
Options +FollowSymLinks
# Make Drupal handle any 404 errors.
ErrorDocument 404 /index.php
# Force simple error message for requests for non-existent favicon.ico.
<Files favicon.ico>
# There is no end quote below, for compatibility with Apache 1.3.
ErrorDocument 404 "The requested file favicon.ico was not found.
</Files>
# Set the default handler.
DirectoryIndex index.php
# Override PHP settings. More in sites/default/settings.php
# but the following cannot be changed at runtime.
# PHP 4, Apache 1.
<IfModule mod_php4.c>
php_value magic_quotes_gpc 0
php_value register_globals 0
php_value session.auto_start 0
php_value mbstring.http_input pass
php_value mbstring.http_output pass
php_value mbstring.encoding_translation 0
</IfModule>
# PHP 4, Apache 2.
<IfModule sapi_apache2.c>
php_value magic_quotes_gpc 0
php_value register_globals 0
php_value session.auto_start 0
php_value mbstring.http_input pass
php_value mbstring.http_output pass
php_value mbstring.encoding_translation 0
</IfModule>
# PHP 5, Apache 1 and 2.
<IfModule mod_php5.c>
php_value magic_quotes_gpc 0
php_value register_globals 0
php_value session.auto_start 0
php_value mbstring.http_input pass
php_value mbstring.http_output pass
php_value mbstring.encoding_translation 0
</IfModule>
# Requires mod_expires to be enabled.
<IfModule mod_expires.c>
# Enable expirations.
ExpiresActive On
# Cache all files for 2 weeks after access (A).
ExpiresDefault A1209600
# Do not cache dynamically generated pages.
ExpiresByType text/html A1
</IfModule>
# Various rewrite rules.
<IfModule mod_rewrite.c>
RewriteEngine on
# If your site can be accessed both with and without the 'www.' prefix, you
# can use one of the following settings to redirect users to your preferred
# URL, either WITH or WITHOUT the 'www.' prefix. Choose ONLY one option:
#
# To redirect all users to access the site WITH the 'www.' prefix,
# (http://example.com/... will be redirected to http://www.example.com/...)
# adapt and uncomment the following:
# RewriteCond %{HTTP_HOST} ^example\.com$ [NC]
# RewriteRule ^(.*)$ http://www.example.com/$1 [L,R=301]
#
# To redirect all users to access the site WITHOUT the 'www.' prefix,
# (http://www.example.com/... will be redirected to http://example.com/...)
# uncomment and adapt the following:
# RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC]
# RewriteRule ^(.*)$ http://example.com/$1 [L,R=301]
# Modify the RewriteBase if you are using Drupal in a subdirectory or in a
# VirtualDocumentRoot and the rewrite rules are not working properly.
# For example if your site is at http://example.com/drupal uncomment and
# modify the following line:
# RewriteBase /drupal
#
# If your site is running in a VirtualDocumentRoot at http://example.com/,
# uncomment the following line:
# RewriteBase /
# Rewrite URLs of the form 'x' to the form 'index.php?q=x'.
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_URI} !=/favicon.ico
RewriteRule ^(.*)$ index.php?q=$1 [L,QSA]
</IfModule>
# $Id: .htaccess,v 1.90.2.3 2008/12/10 20:04:08 goba Exp $
------------------------
Quiptime Group
Da geht noch was.
Lesbare Urls Problem
am 07.04.2009 - 20:21 Uhr
Danke für deine Antwort. Leider kann ich damit nicht viel anfangen, da ich absoluter Neuling bin. Könntest du mir explizit erklären was ich jetzt machen muss ?
Gruß Toby
Noch expliziter geht es nicht.
am 07.04.2009 - 21:19 Uhr
1.
$base_url in der Datei "settings.php"definieren.
2.
Der gepostetet Code der .htaccess zeigt nicht Drupals vollstaendige .htaccess.
In dieser Datei sollte die RewriteBase definiert sein.
Du musst die 2 genannten Dateien aendern. Noch expliziter geht es nicht.
------------------------
Quiptime Group
Da geht noch was.
ok
am 07.04.2009 - 22:42 Uhr
ok habe jetzt die $base_url angepasst. was soll ich im 2. schritt tun. was muss ich in .htaccess eintragen. habe ich überhaupt die richtige .htaccess?
Gruß Toby
Bei welchem Provider liegt
am 07.04.2009 - 23:06 Uhr
Bei welchem Provider liegt die Seite ?
Bei 1&1 zum Beispiel brauchst du nur folgende Zeile in der .htaccess auskommentieren.
RewriteBase /Ansonsten findest du auf unserer Seite eine Anleitung wie man Drupal auf einen 1&1 Shared-Hosting-Paket ordentlich zum laufen bekommt.
--------
Active-Media-Production
Individual Web Development and Design
--------
Active-Media-Production
Individual Web Development and Design
Das Problem ist ich glaube
am 07.04.2009 - 23:11 Uhr
Das Problem ist ich glaube meine .htaccess ist unvollständig (siehe oben). Die datei liegt direkt in /html/.htaccess. Also nicht im ordner drupal, da ich drupal direkt in den root installiert habe.
Gruß Toby
Habs geschafft^^ hab einfach
am 07.04.2009 - 23:29 Uhr
Habs geschafft^^ hab einfach die .htaccess gelöscht und eine neue runtergeladen und diese dann installiert.
Danke an alle
Gruß Toby
@Shankx91, lesen hilft auch!!!
am 08.04.2009 - 00:25 Uhr
@Shankx91, ich hatte in meinem 1. Antwort-Post eine vollstaendige Drupal .htaccess gepostet! War das nicht deutlich genug?
Ich kann ja nicht durch Deinen Screen springen um Dir auf die Spruenge zu helfen.
------------------------
Quiptime Group
Da geht noch was.
Ja. sry hab mich als erstes
am 08.04.2009 - 00:59 Uhr
Ja. sry hab mich als erstes ein bisschen einlesen müssen. Jetzt klappt es mit den Lesbaren Urls zwar, jedoch hats mir nach 5 min mein Theme zerfetzt d.h nur noch Text. Hab schon versucht andere Themes zu laden, passiert aber das gleiche. Habe dann wieder Lesbare Urls deaktiviert = immer noch nichts. Nochmal aktiviert immer noch nichts^^
Habe zwar gesucht aber nichts produktives gefunden^^ oh mann